My Energy MateGet 3 Quotes

Cost guide · Home Batteries

Tesla Powerwall 3 Price in Australia 2026: Installed Cost After the Rebate

By My Energy Mate Editorial · Last updated

Quick Answer

A Tesla Powerwall 3 costs about $11,000 to $14,400 fully installed in Australian capital cities in 2026, after a federal rebate of roughly $3,400. Before the rebate the same job runs about $14,400 to $17,800, with a typical quote near $16,100. Each 13.5 kWh Expansion unit adds about $7,000 to $8,500 installed after its own smaller rebate, because the rate tapers above 14 kWh.

What is in the price

Prices are installer quotes from Sydney, Melbourne, Brisbane, Perth and Adelaide, including GST. After-rebate quotes above $15,000 for a single unit on a simple single-phase home are high. Ask why.

ItemTypical cost
Powerwall 3 unit (13.5 kWh, 11.5 kW inverter built in)$11,500 to $13,500
Backup Gateway 2$1,200 to $1,700
Installation, wiring, switchboard work$2,000 to $3,500
Subtotal before rebate$14,400 to $17,800, typical quote near $16,100
Federal rebate (May to Dec 2026, 6.8 STCs per kWh)about $3,400
Typical installed price after rebate$11,000 to $14,400

Why the Powerwall 3 costs more than most rivals

The Powerwall 3 has a solar inverter built in. Up to 20 kW of panels can plug straight into it, so on a new solar install you skip a separate inverter, which saves $1,500 to $3,000. It also delivers 11.5 kW continuous, enough to run a whole home including air conditioning in a blackout. Most rivals give 5 to 8 kW.

On an existing solar system it works as an AC-coupled battery. The old inverter stays. That flexibility, the Tesla app and a strong resale reputation are what you pay for.

Powerwall 3 versus rivals on price

Per kWh the Powerwall 3 is about $815 to $1,065 after the rebate. Sungrow and GoodWe come in nearer $600 to $960 but usually need a hybrid inverter you may not have.

BatteryUsable kWhBackup powerInstalled after rebate
Tesla Powerwall 313.511.5 kW$11,000 to $14,400
Sigenergy SigenStor 1616.112 kW (with 12 kW inverter)$11,700 to $14,600
Sungrow SBH 12.812.88 to 10 kW (with SH hybrid)$9,400 to $12,300
BYD HVM 1111.0Depends on inverter$8,700 to $11,600
GoodWe Lynx Home F G2 12.812.85 to 10 kW (with hybrid)$7,700 to $10,000

Expansion packs and bigger systems

The Powerwall 3 Expansion unit adds 13.5 kWh of storage with no inverter, for about $9,000 to $10,500 installed before its rebate. The rebate on it is smaller: capacity from 14 to 28 kWh earns 60 percent of the base rate, so the second unit gets about $2,040 rather than $3,400, landing near $7,000 to $8,500. Two units, 27 kWh, run about $18,000 to $23,000 installed after both rebates.

Is the Powerwall 3 worth the extra?

Yes if you want whole-home backup, have 10 kW or more of panels, or are buying solar and battery together and can use its built-in inverter. No if you already have a good hybrid inverter and want the cheapest storage per kWh. In that case a Sungrow or GoodWe battery on your existing inverter saves $2,000 to $4,500.

Frequently asked questions

How much does a Tesla Powerwall 3 cost without installation?
About $11,500 to $13,500 for the unit plus $1,200 to $1,700 for the Backup Gateway. Tesla sells only through certified installers in Australia, so you cannot buy the unit alone.
Does the Powerwall 3 get the federal battery rebate?
Yes. At the May to December 2026 rate of 6.8 STCs per kWh it earns about 92 certificates, worth roughly $3,400. The installer takes it off the quote.
Is the Powerwall 2 still available?
No. Tesla stopped selling the Powerwall 2 in Australia in 2024. Only the Powerwall 3 and its Expansion unit are sold new.
How long is the Powerwall 3 warranty?
10 years with unlimited cycles for solar self-consumption, and 70 percent capacity retained at year 10.

Sources

  1. Tesla Powerwall Australia
  2. Cheaper Home Batteries Program, DCCEEW
  3. Solar Choice battery price index

Go deeper: Home Batteries comparison · best batteries